|Exhibition Loveseat||Exhibition Sofa|
|Overall: 52w x 31.5d x 31h
Seat Height: 17.5
Seat Depth: 18
|Overall: 73 x 31.5d x 31h
Seat Height: 16.5
Seat Depth: 18
|Comparison Feature:||"Signature" Brand||Our "Modern Classics" Brand||Other Cheaper Brands|
|Dimensions of the chair closely match the "signature" Brand||Yes||YES, our dimensions closely match the signature brand, but we have increased the back cushion height by about 1” (so that the frame stays hidden when someone sits in it)||No, Rove, IFN and Room and Board seat cushion is not as deep and sits at steeper angle|
|Offered in High Quality Leather in wide variety of colors||Yes, they use their own brand of leather; not offered in fabric||YES- we used only top-grain Italian leathers in 20 standard leather colors. We import our leather from Italy.||No, they don't always use Italian Leather; or just offer black, tan and white; not offered in fabric|
|Offered in our Exclusive Fabric for no additional charge||No||YES, contact us directly if you would like to order our chair using our Boucle Fabrics. Or, if you have your own fabric or vinyl, we can handle that too, just for a small upcharge||No, they could never do this, they don't run the factory.|
|Cushions use 40 leather panels, cut and hand-tufted, with hand-rolled welting on cushion faces; leather buttons the size of a dime||Yes||YES, hand-rolled welting dates back to the original design and we are one of the few who do this; dime sized, leather covered steel buttons||No, use corded piping on cushions which are uncomfortable; buttons are too big|
|Cushions has leather on top, back and sides||Yes, all surfaces are leather except small area on seat bottom where there is nylon fabric||YES, all surfaces are leather except small area on seat bottom where there is nylon fabric||No, some use faux leather on the backs and sides|
|Back cushion curved to the frame and attached with double snap system using stainless steel snaps||Yes||YES, curved back cushion with angled bottom; 4 stainless steel snaps hold the back cushion in place; seat cushion is also held in place with snaps and straps.||No, straight back cushion does not folow the curve, some use double snaps, some use single snaps. No one uses stainless steel snaps.|
|No Corner seams on the front and back cushion||Yes||YES, we have removed the corner seams on the cushions||Usually there are no corner seams|
|Premium Foam made from USA chemical for 35 year life||Yes||YES, we use HR (High Resilient), Foam from USA suppliers with commercial fire ratings||No, foam quality and density poor.|
|Foam Density adjusted for comfort||No, seat is hard and uncomfortable||YES, we use softer foam in multi-density and Dacron wrapped for superb seat comfort - our most distinguishing feature!||No, cheaper extra dense foam makes the seating comfort level poor|
|Leather belting, finished on both top, bottom and sides; riveted to the frame (2 per strap on each end); 17 belts total||NO, Belting finished on one side only, screwed to frame||YES,matching leather belting finished on both sides and the edges too; riveted; 17 straps.||No, use faux leather or plastic straps, some use leather belting.|
|Premium Stainless steel frame hand-polished to a mirror finish||NO, Mild steel with only flash chrome plating (you can pay extra for stainless)||YES, Premium #304 stainless Steel hand polished to a mirror-like finish||Not always polished to mirror finish; some have mild steel with chrome plating; or lower quality stainless which is milky in color|
|Smooth frame corners||Yes||YES, all seams are welded and ground smooth; leg ends are rounded||Not always ground smooth sharp edges on leg ends|
|Retail Prices||N/A||$2,130 - 3,070||$900 or less|
Our Exhibition Loveseat and Sofa are based on the popular Mies van der Rohe Barcelona style chair, the iconic chair originally created for the Pavilion of German Representation at the 1929 Universal Exhibition in Barcelona, Spain. So there really is no comparison to a "signature brand" of loveseat or sofa - so we just did it against the chair.
Our frame is constructed from premium grade solid bar stock stainless steel. All joints are fully welded, sealed, and seamless. The frame is hand-polished to a mirror finish. The geometry of the frame is accurate to the Mies van der Rohe original design, except wider. Four snaps attach the back cushion to the frame; 2 snaps and a belt attach the bottom cushion to the frame.
The cushion surfaces consist of 64 (loveseat) or 80 (sofa) individual top-grain leather panels; each piece is cut and hand-sewn using a hand-rolling welting technique found only on the "signature" brand and our brand, but not found in other replicas on the market. The seat and back cushions are filled with high resilient - high density polyurethane foam that is CAL117 flame test rated. The cushions are supported by heavy saddle leather straps riveted to the frame and whose top and side edges match upholstery color. Compared to the "signature" brand of chair and other similar chairs on the market, ours are much more comfortable.
Some of the features of our Loveseats and Sofas include:
Modern Classics Furniture offers two levels of Leather for the Mies van der Rohe inspired Barcelona Loveseat and Sofa Collection: "Standard" and "Premium". Each of the these groupings feature:
We are happy to mail you a physical piece of leather so you can hold it in your hands. Just go you our material sample swatch request form page.
Below are the swatches of the leather colors we offer for the Florence Knoll Collection. Our standard leathers (denoted with the prefix L1) are top-grain, semi-aniline-dyed, corrected with a slight embossing. Our Premium leathers (denoted with the prefix L2) are top-grain, 100% aniline-dyed and have a soft feel to them and much of the hides natural grain patterns are retained. They are also a little shinier than the Standard Leather. We do not use split hides leather. Leather thickness is generally 1.0 - 1.2 mm depending on application of seating component for stretching and tailoring the upholstery design and condition. Both the Standard and Premium Leathers are considered equally durable and are ideal for home or commercial use.
Click on any of these swatches to see an enlarged view.
Cafe au Lait
Here at Modern Classics Furniture, we focus tightly on manufacturing and selling furniture in the niche market known as Modern Classics furniture reproductions. Since 1998, we have been a recognized manufacturing and distribution source of modern classic furnishings. Our customers include world renowned architects, interior designers, office furniture dealers, corporate buyers, offices, airports, museums, hotels, and homeowners. We only sell what we make, thus allowing us to control the production process.
If you can, visit one of our showrooms or call the main office:
Location: 410 S Michigan Avenue, Suite 306, Chicago IL 60605
Hours: Tuesday - Saturday: 10 to 4
Showroom Manager: Alison Mitchell 773-572-9449
Click for more Information
Location: 2309 Springlake Rd, Suite 620, Farmers Branch, TX 75234 (Musgrave Assoc.)
Hours: By Appointment only right now.
Contact: Nick Fain 214-215-4669 or Curt Roth 360-733-6400
Click for more Information
Location: 1418 N State Street, Bellingham, WA 98225
Hours: Wednesday - Saturday: 12 to 5
Showroom Manager: Curt Roth: 360-733-6400
Click for more Information