Review and Comparison Guide: Modern Classic's Exhibition Loveseat and Sofa
Inspired by: Mies van der Rohe Barcelona Chair
Exhibition (Barcelona) Loveseat
|Exhibition (Barcelona) Loveseat|
|Our Item No.||MC-1002|
|Base Price||$ 2,260|
|Overall Dimensions:||51.5"w x 31.5"d x 31"h|
|Seat Height:||18 inches|
|Seat Dimensions:||51.5"w x 18"d|
Exhibition (Barcelona) Sofa
|Exhibition (Barcelona) Sofa|
|Our Item No.||MC-1003|
|Base Price||$ 2,850|
|Overall Dimensions:||71.5"w x 31.5"d x 31"h|
|Seat Height:||18 inches|
|Seat Dimensions:||71.5"w x 18"d|
Summary: Modern Classics vs. the Competition
We wrote this review and comparison guide to help you figure out who makes the best Barcelona Sofa and Loveseat that was inspired by the Mies van der Rohe Barcelona Chair. We have not found anyone esle selling these two peices, so we have only highlighted 4 sellers of the iconic Barcelona chairs, and while it seem slightly bias toward our versions, the points are valid and we hope support the notion that our version of these chairs are the best value proposition on the market.
- #304 Stainless Steel Frame (not chrome plated steel)
- Top grain Italian leathers
- Real leather belting (not nylon)
- Matching buttons and leather piping throughout
- Exclusive: Powdercoating in 8 colors are available (for an extra charge)
- Specify your own Fabrics (for an extra charge)
|Feature||Modern Classics||Interior Icons||Barcelona Designs|
|Exhibition Loveseat||$ 2,260||$ 6,479||$ 2,799|
|Exhibition Sofa||$ 2,850||$ 6,479||$ 2,799|
|Strap and Snaps|
Detailed Comparison: Modern Classics vs. Others
Our Barcelona style loveseat and sofa, which we call the Exhibition Loveseat is offered in top grain Italian leather, a frame made of solid bar, #304 Stainless Steel, polished to a mirror-like finish. For an extra charge, we offer powdercoating the frame in 8 standard colors. You may also provide your own upholstery materials for your specific project. We weld and polish the frames in the USA and do all the final assembly and packaging here too. There is about 40 hours of labor that goes into each chair. Most times there is under a 8 week lead time.
Interior Icons sells an Italian made version of the Barcelona Loveseat. Offered in only 3 leather colors, this model would be our second choice for a Barcelona Style loveseat or sofa. Interior Icons prices do not include free Shipping and sales taxes usually will be added, since DWR has a store in most states.
Barcelona style chairs can be found all over the Internet, and are notably because their prices are well below $600. The low market chairs are offered in one or two colors: black and white, and are note known for the use of soft foam, real leather, or correct dimensions. Their chairs use a chrome-plated steel frame. You can also find loveseat or sofa versions of this chair, with similar quality issues. Lead times: Generally in stock.
Our frame dimensions are modeled from original 1964 engineering - production drawings, and are the closest to the designer's original intent of the model updated from his original 1929 version model. Our seat cushions are 18.5 inch deep, the deepest among the competitors and our seat slope extends from 17 inches in the front to 13 inches at the back, allowing it to be easy to get in and out of the chair while adding an extra comfortable sitting experience.
The Seville frame dimensions are slightly smaller in overall size than our version and the curve on the back legs is not correct when compared to the Signature version.
Barcelona Designs' chair frame dimensions seem slightly smaller in overall size than our version and the curve on the back legs is not correct. Not to specifications.
We offer 20 imported Italian leather colors as standard, with the option of providing your own leather or selecting from our wide range of color and texture selection of stock European leather colors for a surcharge.
Interior Icons only offer 3 leather colors, are not offered in Fabric, custom leather or in your own materials. They cannot even give you a leather sample to take home nor can they send out leather samples.
These models are typically offered in only 1 or 2 leather colors: black and white. Upholstery might be leather, bonded leather, or vinyl; in any case, not quality A level Italian or USA leather.
Our Frames are precision formed with No. 304 grade stainless steel and hand-polished to a mirror-like finish. By using higher grade #304 stainless steel we achieve a more natural appearance metal feature than plated chrome as well as a more environmentally safe steel compared to "plated chrome". Stainless steel is easy to maintain, inherently corrosive resistant and repairable by hand polishing offering a near life-time of trouble fee use. Besides the hand-polished look, we can make our frame with a powder coated finish in matte black, matte white or matte bronze.
Their frame is chrome plated to a shiny blue-tint finish. Once again, the chrome plating process of metals has been noted as a generally unsafe manufacturing process for our an environmentally and when scratched or chipped, the steel will rust and it cannot be easily repaired, whereas stainless steel is easy to maintain, inherently corrosive resistant and repairable by hand polishing offering a near life-time of trouble fee use. There are no options besides the polished chrome look, i.e., no powdercoating.
Their chair frame is lower grade stainless steel, machined-polished and has a dull, milky finish. Does not look like chrome or very good stainless steel. Some models use hollow tubing, not solid bar. There are no options besides the polished chrome look, i.e., no powdercoating.
Our Cushions are upholstered with 40 individual panels, which are hand-cut, hand-welted, and hand-tufted with leather buttons about the size of a U.S. dime coin. Our Cushions have leather on top, back and sides, with no seams on the front and top corners. Our back and seat cushions are slightly taller and deeper to the frame, so they look good when someone is seated in them (no folding inward or excess pillowing of the cushions) or when the chair is unoccupied. Our back cushion has the proper curve to match the frame. We use luxury grade HR (High Resilient) Multi-Density Foam in our cushion construction giving our customers a very comfortable sitting experience - the most comfortable on the market! This foam is an environmentally and people safe material produced by a major world-recognized foam manufacturer. Our foam is rated by independent certified testing laboratories and tested for commercial safety grade fire and smoke standards for Europe and USA. Additionally, the foam is wrapped with Dacron polyester fiberfill for additional softness and seat comfort.
The Interior Icons Seville model seat cushion is too short, so the front frame is exposed plus is makes it uncomfortable to sit in. Their back cushion does not have the proper curve to match the frame; seat cushion is not scalloped back edge to match the curve of the frame. Their chair is upholstered with 40 individual panels, but use corded piping between the panels. Corded piping is a fake way to create the hand-welting, and are uncomfortable to sit on. They most likely use highly resilient urethane foam with down-like Dacron polyester fiberfill on the outside. Foam density is super low, making the cushions extra soft and not very comfortable.
These models is seat and back cushions are too big for the frame, making it uncomfortable to sit in. Back cushion does not have the proper curve to match the frame; seat cushion is not scalloped back edge to match the curve of the frame. These models are upholstered with 40 individual panels, but use corded piping between the panels. Corded piping is a fake way to create the hand-welting, and are uncomfortable to sit on. Buttons about the size of a quarter and some models have visible from the back. These models uses inexpensive foam with no Dacron polyester fiberfill wrapped on the on the outside of the foam. Foam density is high, making the cushions extra hard and not very comfortable.
STRAP AND SNAP DETAILS
Our chair straps are dyed to match the specified upholstery color - 17 straps are used for cushion support. Straps are attached to the chair's frame with sturdy high grade anti-corrosive Aluminum rivets. Back cushions are held in place with 4 snaps; seat cushions are held in place with three snaps. Snaps are stainless steel. Our straps core material is comprised of a natural felt core composed of wool, bamboo and polyester material. This achieves some major benefits of fire resistance and smoke accumulation rate without the use of chemical fire retardant chemicals as well as stronger belt tensile / shear strength and no stretching, which can occur with leather belt straps if the wrong type of leather is used.
Their chair's upholstery straps are cowhide leather belting, dyed to match specified upholstery color - 17 straps are used for cushion support. Straps are attached with zinc-plated rivets. Back cushion is held in place with only 2 snaps; seat cushion is held in place with three snaps. Snaps are zinc plated steel.
These models upholstery straps are bonded leather belting or hollow tubes, dyed to match specified upholstery color - 17 straps are used for cushion support. Straps are attached with zinc-plated rivets. Back cushion is held in place with only 2 snaps; seat cushion is held in place with three buckles. Snaps are zinc plated steel.
We offer the extreme flexibility on this model for customizing, with modest up-charges. First, there is the upholstery material. You can provide your own fabric or leather. You can ask us to check with our leather supplier for a specific leather color. We can powder coat the frame using one of our standard colors, or your own selection.
This seller offers no customizing options. There is no other frame choice than chrome or stainless steel.
These models offer no customizing options. There is no other frame choice than chrome or stainless steel.
Our Exhibition Loveseat and Sofa was inspired by the Mies van der Rohe lounge chair known the world over as the "Barcelona Chair". Besides the leather choices, there are also other ways to customize our chairs, . We can powder coat the frame in one of six colors (see below), or you can provide your own material. So while there are many so called replicas or reproductions on the market, we believe our version of the Barcelona Chair is the finest and most comfortable on the market.
Our frame is constructed from premium grade solid bar stock stainless steel. All joints are fully welded, sealed, and seamless. The frame is hand-polished to a mirror finish. Four snaps attach the back cushion to the frame; 2 snaps and a belt attach the bottom cushion to the frame. Our chair cushion surfaces consist of 40 individual top-grain leather panels; each piece is cut and hand-sewn using a hand-rolling welting technique called Capitone, which not found in other similar chairs on the market. (Capitone is the upholstery technique style cushions: tufted pleated squares or sections with buttons or tufting points that are pulled through the seat cushion interior core (foam). This technique of sewing has been around for centuries and found in garment designs, furniture, car and horse carriage seats, etc.) The seat and back cushions are filled with high resilient - high density polyurethane foam. The cushions are supported by heavy saddle leather straps riveted to the frame and whose top and side edges match upholstery color.
Modern Classics Furniture offers two levels of Top-Grain Italian Leathers. Each of the these groupings feature:
- Top-grain Italian leather from Grade A hides
- Semi aniline-dyed (standard) and 100% aniline-dyed (premium)
- Made in Italy and imported to our factory
- Have a UV and Moisture Guard built into the dye
- Are not split hides or bonded leather
We are happy to mail you a physical piece of leather so you can hold it in your hands.
Below are the leather colors we offer for this Collection. Our Standard Leathers (denoted with the prefix L1) are top-grain, aniline-dyed, and then color corrected with a slight embossing to create a more uniform grain pattern. Our Premium leathers (denoted with the prefix L2) are also top-grain, aniline-dyed but have a soft feel to them and much of the hides natural grain patterns are retained. All our leathers are considered equally durable and are ideal for home or commercial use. To read more about leather, read our A Guide to Understanding Upholstery Leather: A Primer.
Click on any of these images for an enlarged view.
Other Metal Frame Color Choices
Besides the standard #304 Polished Stainless Steel frames shown above, we do our own in-house powdercoating over the stainless steel frame. We offer 8 standard colors and there is a $100 extra charge for the custom frame finishing.
Click on any of these swatches to see an enlarged view.
About Modern Classics Furniture
Here at Modern Classics Furniture, we focus tightly on manufacturing and selling furniture in the niche market known as Iconic Modern Classics Furniture. Here's why we are your top choice for Modern Classic Furniture:
- We make and sell only our own products -- we do not sell other manufacturer's product, nor will you find our products elsewhere on the Internet.
- We offer a 3 year warranty
- We only make quality furniture using the best materials
- We offer wholesale and design trade prices - let us be your #1 source - sign up today!
1788 Midway Lane
Bellingham, WA 98226
Curt Roth, President
Please call us if you have any questions at our company headquarters in Bellingham Washington. Call or Email, or you can use this contact us form, we will receive a text message.